Create a pink-and-white rose design with blooming gel on a practice tip. The photographs show the appearance and brush movements to compare. Use only gel products and a UV/LED lamp whose instructions support the technique; curing requirements come from the exact products and lamp.
Products and tools to check
- GELLEN Base Gel, 18ml and GELLEN Glossy Top Coat, 18ml, or another compatible base and top system. Base coat and top coat have different roles; a glossy top coat is not the base layer.
- GELLEN Blooming Gel, 18ml, plus compatible pink and white colour gels. The linked GELLEN white gel #108, 18ml is a lamp-cured gel colour, not ordinary air-drying polish.
- A fine nail-art brush or pen, a practice tip, and a compatible UV/LED lamp.
- Optional nail-art glitter if its instructions allow use with the chosen gel system.
Pink is an appearance choice here, not a promise that any current set contains a particular pink shade. Check the actual shade list and product compatibility before buying. The linked products are individual listings and do not imply that a lamp, brush, colours or glitter are supplied together.
See blooming gel on a practice tip
Watch Girlienails66 demonstrate GELLEN Blooming Gel on a practice tip at 2:18. The creator says she received the gel and notes that some of her discount codes may earn her a commission. Her video shows a separate practice-tip design.
For the product and application sequence, see the GELLEN clear blooming gel and marble-nail guide. The rose design below uses the same spreading step: add compatible colour while the blooming layer is uncured, then cure the completed design layer according to the product and lamp directions.
Step 1: Prepare the practice tip and base
Follow the chosen system's preparation directions, then apply and cure the base coat according to its instructions. Do not substitute top coat for base coat. Check the gel-and-lamp checklist before selecting a timer.
Step 2: Build the first rose area
For the blooming-gel technique, apply a thin layer of blooming gel and leave that layer uncured while adding compatible colour, as directed for the blooming product. Place a small spot of pink in the area where you want the first rose. Watch how the colour spreads rather than using a fixed waiting time.

Step 3: Draw the petal lines
Use a fine brush with compatible white gel to draw curved, broken lines from the centre outward. Compare the shape with the photographs as the design spreads. Cure the design stage according to the directions for the blooming gel, colour products and lamp you are using; there is no single curing duration supplied by this guide.
Step 4: Add the second rose and optional detail
Repeat the design in a second area if desired. Follow the product instructions for each new layer, including when to apply a fresh uncured blooming layer. Optional glitter can be placed around the roses if it is compatible with the system. Do not keep adding uncured layers without following the required curing stages.

Step 5: Finish with top coat
Once the design stages have been cured as directed, apply the compatible top coat and follow its curing and finishing instructions. The photograph below is an appearance example; it does not establish a wear duration or an exact shade match for every product combination.

Before removing the design
Identify all products used on the tip or nail and follow their removal directions. See How to Remove Gel Polish at Home: Match the Remover to the Product. A design tutorial does not make different gel systems interchangeable.